Electric Motors (HT only)
- The motor effect can be used to create a simple d.c electric motor
- The simple d.c. motor consists of a coil of wire (which is free to rotate) positioned in a uniform magnetic field:
- When the current is flowing in the coil at 90o to the direction of the magnetic field:
- The current creates a magnetic field around the coil
- The magnetic field produced around the coil interacts with the field produced by the magnets
- This results in a force being exerted on the coil
- The direction of the force can be determined using Fleming's left-hand rule
- As current will flow in opposite directions on each side of the coil, the force produced from the magnetic field will push one side of the coil up and the other side of the coil down
- This will cause the coil to rotate, and it will continue to rotate until it is in the vertical position
- In the vertical position momentum keeps the coil turning until the magnetic force takes over again
- The split ring commutator swaps the contacts of the coil
- This keeps the current leaving the motor in the same direction (d.c)
- Maintaining the direction of the current also maintains the direction in which the forces are acting
- As a result, the coil will continue to rotate in the same direction
Forces on a coil in a d.c. motor
- The commutator reverses the direction of the current in the coil every half turn
- This will keep the coil rotating continuously as long as the current is flowing
Factors Affecting the D.C Motor
- The speed at which the coil rotates can be increased by:
- Increasing the current
- Use a stronger magnet
- The direction of rotation of coil in the d.c motor can be changed by:
- Reversing the direction of the current
- Reversing the direction of the magnetic field by reversing the poles of the magnet
- The force supplied by the motor can be increased by:
- Increasing the current in the coil
- Increasing the strength of the magnetic field
- Adding more turns to the coil
Worked example
A d.c motor is set up as shown below.Determine whether the coil will be rotating clockwise or anticlockwise.
Step 1: Draw arrows to show the direction of the magnetic field lines
-
- These will go from the north pole of the magnet to the south pole of the magnet
Step 2: Draw arrows to show the direction the current is flowing in the coils
-
- Current will flow from the positive terminal of the battery to the negative terminal
Step 3: Use Fleming’s left hand rule to determine the direction of the force on each side of the coil
-
- Start by pointing your First Finger in the direction of the (magnetic) Field
- Now rotate your hand around the first finger so that the seCond finger points in the direction of the Current
- The THumb will now be pointing in the direction of the THrust (the force)
Step 4: Use the force arrows to determine the direction of rotation
-
- The coil will be turning clockwise
Exam Tip
It is important to remember all the steps that causes the rotation of the coil in a D.C Motor. Use Fleming's Left Hand rule to convince yourself of the direction of the force on each side of the coil, these should be in opposite directions because the direction of the current through them is in opposite directions.