Rigid Body Mechanics (HL IB Physics)

A hollow sphere of radius 650 mm rolls down an inclined plane of length 5.0 m in 4.3 seconds. Assume that the sphere does not slip. 

Moment of inertia of hollow sphere, 

Calculate the linear velocity of the sphere as it reaches the bottom of the plane to three significant figures.

Show that the total kinetic energy, E_ktotal of the sphere at the bottom of the plane is given by the equation:

Determine the angle of incline of the plane to an appropriate degree of accuracy. 

Comment on whether the assumption that the sphere does not slip is valid in this situation. 

A carousel ride consists of two rings of seats at different distances r₁ and r₂ from the centre of the carousel.

After starting from rest the carousel accelerates to a certain angular velocity when the torque of the motor that rotates the carousel is equal to the torque of the forces opposing the motion. The carousel then makes 3.0 revolutions in 10 minutes.

Obtain an expression for the linear velocity of the passengers sitting in ring 2.

It takes 30 seconds for the carousel to accelerate to its constant angular velocity. If , show that the linear acceleration of passengers in ring 1 compared to ring 2 is given by the expression  . 

After 10 minutes on the carousel some of the passengers sitting in ring 1 move to ring 2. 

Explain how this could affect the overall angular velocity of the carousel. 

The movement of the passengers from r₁ to r₂ takes 20 seconds and creates an overall rate of change of moment of inertia of 9 kg m² s⁻¹ on the carousel. 

Calculate the new angular velocity of the carousel after the passengers have moved. 

In a counterweight system, two wooden blocks of mass 3.0 kg and 6.0 kg are connected with a light inextensible string that passes over a smooth pulley. The pulley has a diameter of 40 cm and a mass of 20 kg. 

The masses are released from rest and tensions T₁ and T₂ are created on the strings attached to the masses of 3.0 kg and 6.0 kg respectively. The acceleration of the 6.0 kg mass is 1.1 m s⁻². 

Show that the pulley is in translational but not rotational equilibrium. 

The system starts from rest and the angular velocity after 5.0 seconds is 3.5 rad s⁻¹.

Calculate the number of revolutions made by the pulley in this time. 

Sketch a graph and indicate the known values to show the variation of torque τ on the pulley against time for the motion described in part (b). 

Calculate the angular impulse of the pulley from t = 0 s to t = 5 s. 

Students are performing tricks with pool balls and cues. A ball of diameter 7.5 cm is hit horizontally with a cue and rolls without slipping along the smooth horizontal pool table before rolling up a ramp. The pool ball has a mass of 0.21 kg and a moment of inertia of . The average acceleration of the pool ball during the impact is 163 m s⁻². 

Calculate the average net torque applied to the pool ball during the impact. 

The pool ball is in contact with the cue for 3.2 ms.

Calculate the total kinetic energy of the pool ball after impact. 

Immediately following the impact the pool ball starts to roll up a smooth uniform ramp placed directly in its line of motion. Air resistance is negligible. Determine the maximum vertical height reached by the pool ball. 

After reaching its maximum height the ball rolls back down the ramp.

Determine the angular velocity of the ball at the bottom of the ramp. 

A block of mass 10 g is attached to a light inextensible string hooked around a cylindrical pulley of mass 5.0 kg and radius 0.30 m. 

Moment of inertia of a solid cylinder, 

When the block is released the pulley begins to turn as the block falls.

Calculate the moment of inertia of the cylindrical pulley. 

The linear acceleration of the block as it begins to fall is 2.4 m s⁻².

Calculate the angular acceleration of the pulley as it begins to turn.

Determine the value of the tension in the string. 

Calculate the angular velocity of the pulley after it has rotated 180°.

The moment of inertia of a hollow sphere is where m is the mass of the sphere and r  is the radius.

Show that the total kinetic energy of the sphere E_k  when it rolls without slipping at an angular velocity ω  is .

The hollow sphere has a mass of 0.80 kg and a radius of 30 cm. It rolls without slipping for 20 seconds making 50 rotations.

Calculate the angular velocity.

After making 50 rotations the sphere encounters a ramp in its path and starts rolling without slipping up its smooth inclined surface. 

Determine the maximum height the sphere reaches as it travels up the ramp. 

It takes the sphere 15 seconds to reach its maximum height on the ramp. 

Calculate the angular acceleration of the sphere as it rolls up the ramp. 

A force of 50.0 N is applied at an angle of 43° to a spanner of length 25 cm. 

Calculate the torque provided by this force on the spanner. 

The person applying the force to the spanner changes their grip to obtain a bigger torque. The magnitude of the force applied remains the same.

State and give a reason for the angle the force should be applied to the spanner to obtain its maximum possible value. 

Give two examples of couples. 

Turning a uniform metal bar of length 23.5 cm rotates the mechanism that opens and closes a mains water tap. A couple of forces of magnitude 175 N each are applied at an angle of 75.0° to the bar.

Calculate the torque provided by the couple. 

A 3.5 kg mass hangs vertically from a string fixed 2.8 m above. The mass is free to swing from side to side. 

Calculate the moment of inertia of the mass. 

State the assumptions made in your calculation of the moment of inertia in part (a). 

The mass is set oscillating and it makes one complete oscillation of  radians in 2.4 seconds. 

Determine the angular velocity of the mass. 

Calculate the angular momentum of the mass.