Electric & Magnetic Fields (HL IB Physics)

The diagram shows an air filter which uses charged collecting plates to remove dust from the air of a workshop.

The air intake passes through a charged, ionising grid which attracts dust particles, cleaning the air which is then returned back into the workshop.

A dust particle of mass 6.7 × 10^–15 kg enters the region between the collecting plates travelling horizontally with an initial velocity of 11 m s^–1. The particle carries a charge of 2.6 × 10^–18 C.

 Assume that the dust particles move horizontally between the plates.

Determine the electrostatic force acting on the particle.

Some particles are not caught by the air filter, but pass straight through. Others are caught by the filter. The particles are identical in mass and charge, and they all travel parallel to the plane of the plates. The plates are initially completely clean. Assume the particles are evenly vertically distributed.

Deduce the percentage of dust particles which will be 'trapped' by the negatively charged plate. Ignore the effect of gravity.  

As the air filter operates, there is a build up of particles on the negative plates. The gap between the plates therefore becomes narrower, by up to 10% of its initial height.

Discuss whether this narrowing makes the filter more or less effective at removing dust particles.

Two charged objects X and Y are made to circle a point O. X and Y are at a distance, d = 1.8 × 10⁻⁸ m and they have equal masses, where m = 1.7 × 10⁻⁹ kg.

The objects carry an equal but opposite charge, where the magnitude q = 3.2 × 10⁻¹⁹ C.

For this motion calculate

The particles X and Y in part (a) are replaced with a gold nucleus , and an alpha particle.

Calculate the field strength at the surface of

The alpha particle and gold nucleus are at rest at a distance where the electric fields only just interact with each other.

For the axes shown sketch the graph of electric potential V against distance along the straight line between the charges.

An experiment to determine the charge on an electron is shown.   

Negatively charged oil drops are sprayed into a region above two parallel metal plates which are separated by a distance, d. The oil drops enter the region between the plates.

A potential difference V is applied which causes an electric field to be set up between the plates.

(i)

Using the sketch below, which shows one oil drop falling between the plates, show the electric field between the plates.

[1]

(ii)

Hence or otherwise explain why the oil drop stops falling when V is increased.

[2]

The oil drop has mass = m and charge = q. The distance between the plates = 2.5 cm.

The oil drop stops falling when potential difference, V = 5000 V

Determine the charge to mass ratio of the oil drop.

Two oil drops are suspended between the plates at the same time. The oil drops can be considered as identical point charges with mass 1 × 10⁻¹³ kg which are spaced 2.2 mm apart.

Calculate the electrostatic force between the drops.

For the oil drops in part (c)

Describe and explain the expected observations as the potential difference increases above 5000 V, using a mathematical expression to justify your answer.

Very small cracks in some metals can be detected by a method which includes the use of magnetism. In a particular method for steel pipes, a coil of wire is wrapped around it, and a current passed through the coil. This magnetises the pipe and cracks in the direction shown in the image can be found by sprinkling iron filings on the pipe. 

Cracks along or parallel to the length of the pipe do not show up. 

Deduce why this method cannot be used for copper pipes. 

Explain why iron filings cluster around the crack shown in the image in part (a). 

The crack only shows up if it is across the direction of the field. 

Describe and explain how the coil in the image in part (a) should be arranged so that the magnetic field it produces will show cracks cracks that are along the pipe. 

Three charges are fixed at the corners of a right-angled triangle.

The length of both the horizontal and vertical sides is d.

Show that the electric potential at point P, halfway between the −2Q and −6Q charge is given by .

Before the discovery of quarks, scientists speculated that the subatomic particles might be made up of smaller particles.  
If an electron was made up of three smaller, identical particles with charge q, which are brought in from an infinite distance to the vertices of an equilateral triangle, it would have this arrangement.

The radius of an electron is 2.82 fm. 

Show that the work done in forming an electron consisting of 3 identical particles in this arrangement is given by:

In an electron gun, electrons are released from a cathode and accelerated towards an anode. The electrons leave the electron gun at 10% of the speed of light. 

Calculate the potential difference between the cathode and the anode. 

A science fiction film director is planning for a battle scene between two spacecrafts. The first spacecraft uses an electron gun to fire a beam of electrons at the second spacecraft from close range. The electron beam is created by accelerating electrons from rest between electrodes with a potential difference of 120 V.  

To shield against the attack, the second aircraft creates a uniform electric field around itself and the electrons are stopped after 85 m. The director wishes to calculate the strength of the electric field, but is not aware of the equation .

Calculate the strength of the electric field without the use of this equation.

After the failure of the first spacecraft to break through the electric shield of the second spacecraft a new weapon is to be designed. Instead of firing electrons, research is carried out to see if firing negatively charged ions with a charge of –2e and a mass of 2.26 × 10^-26 kg would be more effective. The second spacecraft uses the same electric field as in part (a) to shield itself and that the electric field is uniform.

Calculate the magnitude of the minimum velocity at which these ions would need to be fired if they are to strike the second spacecraft from a distance of 1 km.

Another option to attack the second spacecraft is to create a superweapon which can be fired from the aliens' home planet. As this weapon will fired from such a long way away from the second spacecraft, the spaceship and shield can be modelled as a charged particle carrying a charge of −130 C. The electrons fired by the superweapon have a kinetic energy of 12 MeV.

Calculate how close the electrons will come to the second spacecraft before they are stopped by the shield.

This question is about forces on objects held in fields. The first part is about electrically charged objects and the second part concerns bodies moving in gravitational fields.

The dome of a Van der Graaf generator can be treated as a conducting metal sphere with radius 20 cm. The dome is charged so that it has uniform surface charge + 13.1 μC. A stand is set up nearby, so that a pith ball with radius 1 cm, mass 11 g and charge + 1.8 μC can swing freely near to the dome.

The line of motion of the ball can be treated as normal to the surface of the dome.

The pith ball is held at a point 40 cm from the surface of the dome and pushed, so that it moves towards the dome with initial speed of 2.2 m s⁻¹. It stops moving and hangs suspended at a certain distance from the surface of the dome.

Calculate the distance between the surfaces of the dome and the pith ball when the ball stops moving.

Two charged, horizontal, parallel metal plates are a distance d apart.

A small oil drop P is positioned between the plates such that when the potential difference between the plates is V₁, the drop is stationary. The potential difference is changed to V₂ and the drop moves upwards with a constant velocity v.

Complete the diagrams with the names, directions and relative magnitudes of the forces acting on the oil drop for the situations when pd = V₁ and pd = V₂.

When a small, smooth sphere moves through a fluid such as air with low velocity v it experiences a resistive force. The force can be expressed in terms of a constant k so that:

The magnitude of the charge on the oil drop is q, and the distance between the plates is d.

Determine an expression which relates the velocity the oil drop moves upwards when the potential difference between the plates changes to the constant k. 

A parallel-plate capacitor is an electrical component that stores electric charge.

It is set up by connecting two metal plates to a power supply.

Label:

[1]

[1]

[2]

State, for each of the scenarios below, whether the electric field strength between the metal plates increases, decreases, or stays constant:

A free electron finds itself incident in the space between the metal plates and is deflected as it moves between them.

The magnitude of the electric field strength is 200 N C^–1. Calculate the magnitude of the electron’s acceleration in the space between the plates.

Explain the shape of the path shown in part (c).

State Coulomb’s law in words.

In simple models of the hydrogen atom, an electron is in a circular orbit around the proton.

The magnitude of the force between the proton and the electron is 5.8 × 10^–9 N.

Calculate:

(i)        the orbital radius of the electron.

                                                [2]

                                                [2]

The gravitational field strength g due to the proton at any point in the electron’s orbit is given by the equation:

where  is the proton mass, r is the orbital radius and G is the gravitational constant.

Show that the ratio of the gravitational field strength to the electric field strength due to the proton at any point in the electron’s orbit is of the order 10^–28.  

Ionisation is the process of removing an outer shell electron from an atom, so it is transferred from its orbit to a point where the potential is zero.

The potential difference between the electron’s orbit in a hydrogen atom and this point is about 3.4 V.

Calculate the gain in potential energy of an orbiting electron in a hydrogen atom if it is ionised.

Two charged objects, A and B, are brought close together. The equipotential lines around each object is shown. 

[1]

A different pair of equally charged objects, C and D, are brought close together. Equipotential lines at –10 V, –6 V and –2 V around C and D are shown.

Draw electric field lines between C and D. 

Identify the electric charge on objects A and B and explain your answer. 

Objects C and D are now given a charge of –3.5 nC and –4.0 nC respectively. 

X is a position at –6 V which is equidistant from both C and D. 

Determine the potential due to object C at the position labelled X. 

Hydrogen atoms in an ultraviolet (UV) lamp make transitions from the first excited state to the ground state. Photons are emitted and are incident on a metallic, photoelectric surface as shown.

The photoelectric surface is grounded, and the variable power supply is adjusted so that the electric potential of the collecting surface is 1.5 V. 

Describe the properties of the electric field between the photoelectric surface and the collecting plate. 

On the diagram, draw and label equipotential lines at 0.5 V and at 1.0 V.

Electrons are released from the photoelectric surface and move toward the collecting plate. 

Determine the work done by the electric field on the electrons as they arrive at the midpoint between the photoelectric surface and the collecting plate. 

Describe the motion of the electrons between the photoelectric plate and the collector plate. Your answer should consider the field at the edges of the plates. 

A β^– particle is placed above a grounded metal plate. 

Sketch the electric field lines between the β^– particle and the metal plate. 

The β^– particle is replaced with an α particle at the same position above the grounded metal surface. 

Outline the similarities and differences between the electric field now created to that in part (a).

The grounded metal surface is removed in order to analyse the combined electric field created between the α particle and the β^– particle.

Sketch the electric field produced between an α particle and a β^– particle.

Discuss whether there is a point of zero electric field for the diagram in part (c).

Define electric potential at a point in an electric field. 

A point charge of mass 1.30 × 10^–4 kg is moving radially towards a small, charged metal sphere as shown. 

The electric potential at the surface of the sphere is 9.00 × 10⁴ V. Determine if the point charge will collide with the metal sphere. 

Determine the speed at which the point charge is certain to collide with the metal sphere.

Protons are positively charged and are often described as "colliding" in particle accelerator experiments, as well as in the core of stars. 

Discuss the implications of two protons colliding in terms of the forces between them. Describe the conditions necessary for such a collision to take place. 

A charge –q with mass m orbits a stationary charge q with a constant orbital radius r. 

Draw the electrostatic force on –q due to the electric field created by q.

Show that the orbital speed of v is given by: 

Show that the total energy E of the orbiting charge is given by: 

Hence, determine an equation for how much energy must be supplied to –q if it is to orbit the stationary charge q at twice the radius in part (c), 2r.