Edexcel IGCSE Chemistry: Double Science

Topic Questions

IGCSEChemistry: Double ScienceEdexcelTopic Questions1. Principles of Chemistry1.5 Chemical Formulae, Equations, Calculations

1.5 Chemical Formulae, Equations, Calculations

DownloadView
Medium
Hard
Medium
Hard
1a4 marks

Many different salts can be prepared from acids.

a)
The table shows the reactants used in two salt preparations. Complete the table to show the name of the salt formed and the other product(s) in each case.
[4] 
Reactants Name of salt formed Other product(s)
zinc + hydrochloric acid    
calcium carbonate + nitric acid    

How did you do?

1b4 marks
b)
A student uses the reaction between aluminium hydroxide and dilute sulfuric acid to prepare a pure, dry sample of aluminium sulfate crystals. The equation for the reaction used to prepare this salt is:

2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2O

The diagram shows the steps in the student’s method.

screen-shot-2022-10-11-at-13-23-21

i)
State two ways to make sure that all the acid is reacted in step 2.
[2] 
ii)
State the purpose of filtration in step 3.
[1] 
iii)
In step 5, the basin is left to cool to room temperature to allow crystals of aluminium sulfate to form.
State one method of drying these crystals.
[1] 

How did you do?

1c
Sme Calculator3 marks
c)
The student records this information about the reagents she uses in her preparation.

   mass of aluminium hydroxide = 3.9 g
   amount of sulfuric acid = 0.090 mol

Determine which reagent is in excess, making use of this information and the equation in part (b).
[3]
 
reagent used in excess = ..............................................................

How did you do?

1d
Sme Calculator3 marks
d)
Another student prepares 0.25 mol of aluminium sulfate. The formula of aluminium sulfate is Al2(SO4)3

Calculate the mass of aluminium sulfate prepared.

[3]




mass = .............................................................. g

How did you do?

1e3 marks
e)
The equation for another reaction used to prepare a sample of a salt is:

PbO + 2HNO3 → Pb(NO3)2 + H2O

In one experiment, the amount of lead(II) oxide used was 0.75 mol and the amount of nitric acid used was 1.5 mol. At the end of the experiment, the mass of lead(II) nitrate obtained was 209 g.

Calculate the percentage yield of lead(II) nitrate in this experiment.

[Mr of lead(II) nitrate = 331]
[3]


percentage yield = .............................................................. % 

How did you do?

Did this page help you?

2a3 marks

Nitric acid (HNO3) is used in the production of fertilisers.

Nitric acid is manufactured in three stages.

Stage 1 ammonia reacts with oxygen in the presence of a platinum catalyst to produce nitrogen monoxide gas, NO, and water.
Stage 2 nitrogen monoxide gas reacts with more oxygen to produce nitrogen dioxide gas, NO2.
Stage 3 nitrogen dioxide gas reacts with water to produce nitric acid and more nitrogen monoxide gas.

a)

i)
Complete the chemical equation for the reaction in stage 1.

......................NH3 + ......................O2 rightwards harpoon over leftwards harpoon ......................NO + .......................H2O

(1)

ii)
Give the meaning of the symbol rightwards harpoon over leftwards harpoon

(1)

iii)
State the purpose of the platinum catalyst.

(1)

How did you do?

2b1 mark
b)
Give a chemical equation for the reaction of nitrogen monoxide and oxygen in stage 2.

(1)

How did you do?

2c
Sme Calculator5 marks

c)

i)
The equation for the reaction in stage 3 is

3NO2 + H2O → 2HNO3 + NO

Calculate the maximum mass, in tonnes, of nitric acid that could be produced in this reaction from 11.5 tonnes of nitrogen dioxide.
[1 tonne = 1.0 × 106 g]

(4)

mass of nitric acid = ...................................................................... tonnes

ii)
Suggest what use can be made of the nitrogen monoxide gas formed in stage 3.

(1)

How did you do?

2d
Sme Calculator3 marks
d)
When copper(II) oxide reacts with dilute nitric acid, copper(II) nitrate is produced.

The equation for the reaction is

CuO + 2HNO3 → Cu(NO3)2 + H2O

0.200 mol of nitric acid reacts with excess copper(II) oxide.
A mass of 15.3g of copper(II) nitrate is produced.

Calculate the percentage yield of copper(II) nitrate.

[Mr of copper(II) nitrate = 187.5]

(3)

How did you do?

Did this page help you?

3a2 marks

Sodium hydrogencarbonate (NaHCO3) is also known as baking soda.

Baking soda can be used to make cakes increase in size in an oven.

This is the equation for the reaction that takes place when baking soda is heated.

2NaHCO3 (s) → Na2CO3 (s) + CO2 (g) + H2O (g)

a) i)
What type of reaction is this?
 
(1)
 
  ☐ A combustion
  ☐ B decomposition
  ☐ C oxidation
  ☐ D reduction
  
ii)
Suggest why the reaction makes the cakes increase in size.
 
(1)

How did you do?

3b3 marks
b)
A student uses this apparatus to investigate the reaction that takes place when sodium hydrogencarbonate is heated.
 
nahco3-thermal-decomposition
 
This is the student’s method.
  • Weigh a crucible and record the mass
  • Add some sodium hydrogencarbonate to the crucible, reweigh it and record the mass
  • Heat the crucible and contents for five minutes, then allow to cool before weighing and recording the mass
  • Heat the crucible and contents again for a further three minutes, then allow to cool before weighing and recording the mass
 
i)
Give a reason why the crucible and contents are heated for a further three minutes.
 
(1)
 
ii)
The student considered using a lid on the crucible in the experiment.
 
Suggest an advantage and a disadvantage of using a lid on the crucible.
 
(2)
 
advantage ....................................................................................................
 
disadvantage ....................................................................................................

How did you do?

3c
Sme Calculator4 marks
c)
The table shows some of the student’s results.
 
mass of crucible and sodium hydrogencarbonate in g 29.75
mass of empty crucible in g 26.50
 
i)
Calculate the mass of sodium hydrogencarbonate that the student uses.
 
(1)
 
mass = ..............................................................g
 
ii)
Using this equation, calculate the maximum mass of sodium carbonate (Na2CO3) that could form in the student’s reaction.
 
2NaHCO3 (s) → Na2CO3 (s) + CO2 (g) + H2O (g)
 
[Mr of NaHCO3 = 84   Mr of Na2CO3 = 106]
 
(3)
 
maximum mass = .............................................................. g

How did you do?

3d
Sme Calculator3 marks
d)
In a second experiment, the student uses a larger mass of sodium hydrogencarbonate.
 
She calculates that she should obtain 4.8 g of sodium carbonate.
 
She actually obtains 4.2 g of sodium carbonate.
 
i)
Calculate the percentage yield from the student’s experiment.
 
(2)
 
percentage yield = ..............................................................%
 
ii)
Other than spillages, suggest a possible reason why the student’s actual yield is less than expected.
 
(1)

How did you do?

Did this page help you?

4a3 marks

This question is about alkanes.

a)
The graph shows the boiling points of several unbranched alkanes.

2021-ja1c-q10a

i)
Draw a curve of best fit.

(1)

ii)
Use the graph to find the boiling point of the alkane with 7 carbon atoms in its molecule. 
Show on the graph how you obtain your answer.

(2)

boiling point = .............................................................. °C

iii)
Explain the trend shown by the graph.

(3)

How did you do?

4b2 marks
b)
The diagram represents two isomers with the formula C5H12

2021-ja1c-q10b

   Explain why these compounds are isomers.

(2)

How did you do?

4c
Sme Calculator3 marks

c)

i)
An alkane contains 82.8% carbon and 17.2% hydrogen by mass.

Show by calculation that the empirical formula of this alkane is C2H5

(2)

ii)
Deduce the molecular formula of this alkane.

(1)

How did you do?

4d
Sme Calculator3 marks
d)
The equation for the complete combustion of one mole of an alkane can be represented by
alkane + ZO2 → XCO2 + YH2O

Complete combustion of one mole of the alkane produces 308 g of carbon dioxide and 144 g of water.

X, Y and Z are the numbers used to balance the equation.

Calculate the values of X, Y and Z.
[Mr of CO2 = 44, Mr of H2O = 18]

(3)


X = ................................
Y = ................................
Z = ................................

How did you do?

Did this page help you?

5a3 marks
a)
The diagram shows the apparatus a teacher uses to determine the formula of an oxide of lead.
 
This is the teacher’s method.
  1. Find the mass of the reduction tube
  2. Add some of the lead oxide to the reduction tube
  3. Find the mass of the reduction tube and lead oxide
  4. Pass hydrogen gas over the lead oxide and ignite the hydrogen at the hole
  5. Heat the lead oxide strongly for 10 minutes
  6. Keep passing hydrogen through the reduction tube until the tube and contents are cool
  7. Find the new mass of the reduction tube and its contents
 
i)
Give a reason why hydrogen is passed through the reduction tube until the tube and contents are cool.
 
(1)
 
ii)
Describe what the teacher should do next to make sure all the lead oxide has been reduced to lead.
 
(2)

How did you do?

5b
Sme Calculator6 marks
b)
The teacher completes the experiment and obtains these results.
 
  • mass of reduction tube = 23.50 g
  • mass of tube + lead oxide = 28.64 g
  • mass of tube + lead = 28.16 g
 
i)
Calculate the mass of lead formed.
 
(1)
 
mass of lead = .............................. g
 
ii)
Calculate the mass of oxygen removed from the lead oxide.
 
(1)
 
mass of oxygen = .............................. g
 
iii)
Determine the empirical formula of the lead oxide.
 
(4)
 
empirical formula of the lead oxide .............................. 

How did you do?

5c
Sme Calculator4 marks
c)
The insoluble salt lead(II) chloride (PbCl2) can be prepared by reacting a solution of lead(II) nitrate with dilute hydrochloric acid.
 
i)
Complete the equation for the reaction by adding the state symbols.
 
(1)
 
Pb(NO3)2 (..........) + 2HCl (..........) → PbCl2 (..........) + 2HNO3 (..........) 
 
ii)
Show that the maximum mass of lead(II) chloride that can be made from 0.0370 mol of hydrochloric acid is about 5 g.
 
[Mr of PbCl2 = 278]
 
(3)
 
maximum mass = .............................. g

How did you do?

Did this page help you?

6a4 marks

A student uses this apparatus to heat crystals of hydrated zinc sulfate and collect the liquid produced.

hydrated-zinc-sulfate-experiment

a) i)
Describe a chemical test to show that the colourless liquid contains water.
 
(2)
 
ii)
Describe a physical test to show the colourless liquid is pure water.
 
(2)

How did you do?

6b
Sme Calculator5 marks
b)
The equation for the decomposition of hydrated zinc sulfate is
 
ZnSO4·7H2O (s) → ZnSO4 (s) + 7H2O (l)
 
The student records these masses.
 
  • mass of boiling tube = 41.64 g
  • mass of boiling tube + ZnSO4·7H2O = 54.46 g 
Calculate the maximum volume, in cm3, of pure water that could be produced.
 
Give your answer to 1 decimal place.
 
[1.00 cm3 of pure water has a mass of 1.00 g]
 
[Mr of ZnSO4·7H2O = 287   Mr of H2O = 18]
 
(5)
 
maximum volume of pure water = .............................. cm3

How did you do?

6c
Sme Calculator3 marks
c)
In an experiment using a different mass of ZnSO4·7H2O the maximum volume of pure water that could be produced is 8.5 cm3.
 
The student collected the pure water and calculated the percentage yield to be 20.3%.
 
i)
Calculate the volume, in cm3, of pure water collected.
 
(1)
volume of pure water = .............................. cm3
 
ii)
Explain an improvement to the apparatus that would increase the percentage yield of pure water.
 
(2)

How did you do?

Did this page help you?

7a2 marks

This question is about the reduction of metal oxides.

a)
Solid oxides of copper can be reduced by reacting them with methane gas.
Complete the equation for the reaction between copper(II) oxide and methane.
Include state symbols.

(2)


.....CuO (.....) + .....CH4 (.....) rightwards arrow .....Cu (.....) + .....CO2 (.....) + .....H2O (.....)

How did you do?

7b5 marks
b)
A teacher uses this apparatus to demonstrate the reaction between a different oxide of copper and methane.

reaction-of-methane-and-copper

The teacher heats the oxide of copper until the reaction is complete.
The table shows the teacher’s results.

  Mass in g
empty weighting boat 15.05
weighing boat + oxide of copper 18.63
weighing boat + copper 18.23

i)
Use the teacher’s results to show that the empirical formula of this oxide of copper is Cu2O

(4)

ii)
The teacher wears safety glasses and a lab coat during the demonstration.
Give one other safety precaution that she should take.

(1)

How did you do?

7c8 marks
c)
Iron forms when iron(III) oxide is heated with carbon.
The equation for the reaction is:

Fe2O3 + 3C → 2Fe + 3CO

i)
State how the equation shows that iron(III) oxide is reduced.

(1)

ii)
State why carbon monoxide should not be released into the atmosphere.

(1)

iii)
Calculate the maximum mass, in tonnes, of iron that can be produced when 30.0 tonnes of iron(III) oxide are reacted with an excess of carbon.

[1 tonne = 1.0 × 106 g]

(4)

mass = .............................................................. tonnes

 

iv)
A mixture of 25 000 mol of iron(III) oxide and 840 000 g of carbon is heated.
Use this equation to show that the iron(III) oxide is in excess.

Fe2O3 + 3C → 2Fe + 3CO

(2)

How did you do?

Did this page help you?

8a2 marks

A student uses the reaction between zinc and dilute sulfuric acid to prepare some zinc sulfate crystals.

a) i)
Complete the equation for this reaction by giving the correct state symbols.
(1)

Zn (....................) + H2SO4 (....................) → ZnSO4 (....................) + H2 (....................)

ii)
State what would be observed during this reaction.

(1)

How did you do?

8b4 marks
b)
The student adds excess zinc to a beaker of dilute sulfuric acid.

i)
Explain why it is necessary to add excess zinc.

(2)

ii)
Draw a diagram of the apparatus the student should use to remove the unreacted zinc and collect the zinc sulfate solution.

(2)

How did you do?

8c
Sme Calculator7 marks
c)
The student obtains a pure, dry sample of zinc sulfate crystals. The formula of zinc sulfate crystals is ZnSO4.7H2O

i)
Calculate the relative molecular mass (Mr) of zinc sulfate crystals.
(2)



Mr = ..............................................................

ii)
The student uses 0.0200 mol of dilute sulfuric acid in her preparation. Show that the maximum mass of zinc sulfate crystals that the student could obtain is about 6 g.

(2)




iii)
The student obtains a mass of 4.28 g of zinc sulfate crystals. Calculate the percentage yield of the zinc sulfate crystals. Give your answer to three significant figures.

(3)



percentage yield = ..............................................................%

How did you do?

Did this page help you?

9a2 marks
a)
Explain the meaning of the term thermal decomposition.
 
(2)

How did you do?

9b
Sme Calculator4 marks
b)
The equation for the thermal decomposition of potassium hydrogencarbonate is
 
2KHCO3 → K2CO3 + H2O + CO2
 
Calculate the maximum mass of K2CO3 that could be produced from the thermal decomposition of 2.50 g of KHCO3
 
(4)

How did you do?

Did this page help you?

10a1 mark
a)
A student is given a pure sample of sodium carbonate crystals and is told that the formula of the crystals is Na2CO3.xH2O
 
State what xH2O in the formula shows about the sodium carbonate crystals.
 
(1)

How did you do?

10b
Sme Calculator5 marks
b)
The student uses this apparatus to find the value of x in Na2CO3.xH2O
 
water-of-crystallisation-experiment
 
This is the student’s method.
 
  • Find the mass of an empty crucible without a lid
  • Add some sodium carbonate crystals Na2CO3.xH2O to the crucible
  • Find the total mass of the crucible and sodium carbonate crystals
  • Heat the crucible to remove water from the crystals
  • Allow the crucible and contents to cool down
  • Find the mass of the cold crucible and its contents
These are the student’s results.
 
  Mass in grams
empty crucible 22.75
crucible and sodium carbonate crystals, Na2CO3.xH2O 29.71
cold crucible and contents 25.93
 
i)
Calculate the mass of sodium carbonate left after heating and cooling.
 
(1)
 
mass of sodium carbonate = .............................................................. g
 
ii)
Calculate the mass of H2O lost from the sodium carbonate crystals during heating.
 
(1)
 
mass of H2O = .............................................................. g
 
iii)
Show that the student’s results suggest that the formula of the sodium carbonate crystals is Na2CO3.7H2O
 
[Mr of Na2CO3 = 106   Mr of H2O = 18]
 
(3)

How did you do?

10c4 marks
c)
The student’s teacher says that the correct formula of the sodium carbonate crystals is Na2CO3.10H2O
 
i)
The student did not make any mistakes in their measurements.
 
Explain what could have caused the student’s value for x to be too low.
 
(2)
 
ii)
Describe how the student could improve the method to obtain a more accurate value for x.
 
(2)

How did you do?

Did this page help you?

11a2 marks

The mineral nesquehonite is a form of hydrated magnesium carbonate. The formula, MgCO3.xH2O, shows that nesquehonite contains water of crystallisation. When a sample of nesquohonite is heated gently, the water of crystallisation is given off and anhydrous magnesium carbonate is left. Six students are each given a sample of nesquehonite of mass 6.1 g. The students heat their samples for different times. The samples are then allowed to cool before being reweighed. The table shows their results.

time of heating / minutes 0 1.0 2.0 3.0 4.0 4.5 6.0
mass of sample after heating / g 6.1 5.3 4.5 3.7 2.8 2.4 2.4

a)
Plot these results on the grid provided. The last two points have been plotted for you. Draw a straight line of best fit for the points you have plotted.
(2) 
screen-shot-2022-10-12-at-15-36-20

How did you do?

11b2 marks
b)
Predict the mass of sample remaining after heating for 2.5 minutes. Show on the graph how you obtain your answer.

(2)




mass after 2.5 minutes = .............................................................. g


How did you do?

11c1 mark
c)
State why the last two masses in the table are exactly the same.
(1)

How did you do?

11d
Sme Calculator3 marks
d)
A sample of nesquehonite contains 1.68 g of MgCO3 and 1.08 g of H2O. Calculate the value of x in the formula MgCO3.xH2O

[Mr of MgCO3 = 84; Mr of H2O = 18]

(3) 





x = ..............................................................

How did you do?

Did this page help you?

1
Sme Calculator1 mark

A student wanted to make 15.0 g of zinc chloride. The equation for the reaction is:

ZnCO3 + 2HCl →  ZnCl2 + CO2 + H2O

What mass of zinc carbonate should the student add to the hydrochloric acid to make 15.0 g of zinc chloride?

[Ar of C = 12;   Zn = 65;   O= 16;  Cl = 35.5;   H= 1]

(1)

  ☐ A 11.0 g
  ☐ B 13.8 g
  ☐ C 15.0 g
  ☐ D 22.0 g

How did you do?

Did this page help you?

2
Sme Calculator1 mark

How many moles are present in 9 kg of glucose, C6H12O6?

[Mr of  C6H12O6 = 180 ]

(1)

  ☐ A 0.02 mol
  ☐ B 0.05 mol
  ☐ C 20 mol
  ☐ D 50 mol

How did you do?

Did this page help you?

3a3 marks

The boxes show the displayed formulae of six organic compounds, P, Q, R, S, T and U.

2020-ja1c-q5a

a)
Use the letters P, Q, R, S, T and U to answer these questions.
Each letter may be used once, more than once or not at all.

i)
Give the letter of the compound that is not a hydrocarbon.

[1]

ii)
Give the letters of the two compounds that have the same empirical formula.

[1]

iii)
Give the letter of the compound that is used to manufacture poly(propene).

[1]

How did you do?

3b3 marks
b)
Describe a test that can be used to distinguish between compounds Q and T.
 
[3]
 
test ....................................................................................................
 
result with compound Q ....................................................................................................
 
result with compound T ....................................................................................................

How did you do?

3c2 marks
c)
Compounds P, Q and R are members of the same homologous series.

Give two characteristics of a homologous series.

[2]

How did you do?

3d2 marks
d)
This is the displayed formula of an alkene, V.

2020-ja1c-q5d

i)
Give the name of alkene V.

[1]

ii)
Draw the displayed formula of another alkene that is an isomer of alkene V.

[1]

How did you do?

3e
Sme Calculator2 marks
e)
An organic compound has the percentage composition by mass

C = 36.36% H = 6.06% F = 57.58%

i)
Show that the empirical formula of the compound is CH2F

[2]

ii)
The relative molecular mass (Mr) of the compound is 66.

Determine the molecular formula of the compound.

[2]

molecular formula = ......................................................................

How did you do?

Did this page help you?

4
Sme Calculator1 mark

What is the mass of 0.25 moles of hydrated copper(II) sulfate, CuSO4.5H2O?

Relative formula mass (Mr):  H2O = 18  CuSO4 = 160

(1)

  ☐ A 40.0 g
  ☐ B 44.5 g
  ☐ C 62.5 g
  ☐ D 1000 g

How did you do?

Did this page help you?

5a2 marks

Sodium hydroxide dissolves in water, forming a strongly alkaline solution.

Ammonia dissolves in water, forming a slightly less alkaline solution.

a) i)
Identify the ion that makes the sodium hydroxide solution alkaline.
 
(1)
 
ii)
What is a possible pH of ammonia solution?
 
(1)
 
A 3
B 6
C 11
D 14
 

How did you do?

5b1 mark
b)
When ammonia solution reacts with sulfuric acid, a neutralisation reaction occurs and ammonium sulfate forms.
 
i)
How does the sulfuric acid act in this reaction?
 
(1)
 
A as a neutron donor
B as a neutron acceptor
C as a proton donor
D as a proton donor
 
ii)
The diagram shows a beaker containing some ammonia solution and a few drops of phenolphthalein indicator.
 
ammonia-solution-and-phenolphthalein-indicator
 
Dilute sulfuric acid is added to the beaker until it is in excess.
 
What are the colours of the phenolphthalein indicator before and after adding excess sulfuric acid?
 
(1)
 
  Before After
A orange red
B yellow red
C pink colourless
D colourless pink

How did you do?

5c
Sme Calculator6 marks
c)
Ammonium sulfate is used by gardeners as a fertiliser because it contains nitrogen.
 
i)
Explain why the chemical formula of ammonium sulfate is (NH4)2SO4
 
Refer to the charges on the ions in your answer.
 
(2)
 
ii)
Calculate the relative formula mass of ammonium sulfate, (NH4)2SO4
 
(1)
 
relative formula mass = ..............................................................
 
iii)
Calculate the mass, in grams, of nitrogen in 1.0 kg of ammonium sulfate.
 
(3)
 
mass = .............................................................. g

How did you do?

Did this page help you?

6
Sme Calculator1 mark

When zinc oxide reacts with dilute nitric acid, zinc nitrate is produced. The equation for the reaction is:

ZnO + 2HNO3 → Zn(NO3)2 + H2O

0.200 mol of nitric acid reacts with excess zinc oxide. A mass of 15.3 g of zinc nitrate is produced.
Calculate the percentage yield of zinc nitrate.
[Mr of zinc nitrate = 189]

(1)

  ☐ A 26.8%
  ☐ B 37.8%
  ☐ C 80.9%
  ☐ D 65.1%

How did you do?

Did this page help you?

7a2 marks
a)
The diagram shows the displayed formula of the organic compound methanol, CH3OH
screen-shot-2022-10-18-at-09-05-41

i)
Determine the number of atoms in one molecule of methanol.

(1)

ii)
State why methanol is not a hydrocarbon.

(1)

How did you do?

7b4 marks
b)
The atoms in methanol are held together by covalent bonds.

i)
State what is meant by the term covalent bond.

(2)

ii)
Draw a dot-and-cross diagram to show the bonding in a molecule of methanol. Show only the outer electrons of each atom.

(2)

How did you do?

7c
Sme Calculator5 marks
c)
Another organic compound has the percentage composition by mass

C = 38.7% H = 9.7% O = 51.6%

i)
Calculate the empirical formula of this compound.

(3)





empirical formula = ..............................................................

ii)
The relative molecular mass (Mr) of the compound is 62

Determine the molecular formula of the compound.
(2)



molecular formula = ........................................................ 

How did you do?

Did this page help you?

8
Sme Calculator1 mark

What numbers will balance the following equation?

_Fe (s) + _O2 (g) → _Fe2O3 (g)

(1)

  ☐ A 2,3,4
  ☐ B 4,3,2
  ☐ C 2,3,1
  ☐ D 1,2,3

How did you do?

Did this page help you?

9a3 marks
a)
A piece of magnesium ribbon is ignited and placed in a gas jar of oxygen.

The equation for the reaction is

2Mg + O2 → 2MgO

i)
Give two observations that would be made in this reaction.
(2)

1..................................................................................................................................................................

2..................................................................................................................................................................

ii)
State why this is an oxidation reaction.

(1)

How did you do?

9b3 marks
b)
A second piece of magnesium ribbon is ignited and placed in a gas jar of carbon dioxide. A very exothermic reaction occurs, forming magnesium oxide and carbon.

i)
State what is meant by the term exothermic.
(1)

ii)
Give the chemical equation for this reaction.
(1)

iii)
A fire starts in a warehouse where magnesium is stored. Suggest why it would not be suitable to use a carbon dioxide fire extinguisher to put out this fire.
(1)

How did you do?

9c4 marks
c)
A student uses this apparatus to find the mass of magnesium oxide that forms when a known mass of magnesium is heated.

screen-shot-2022-10-18-at-22-09-37

   This is his method.

  • find the mass of the crucible and lid
  • place some magnesium ribbon in the crucible
  • find the mass of the crucible, lid and magnesium
  • heat the crucible with the lid on for a few minutes
  • find the mass of the crucible, lid and magnesium oxide
Using this method, the mass of magnesium oxide formed is less than expected. Explain two changes that the student should make to his method to obtain a mass of magnesium oxide closer to the expected mass.
(4)

How did you do?

Did this page help you?

10
Sme Calculator1 mark

Halon 1301 is a compound used in some fire extinguishers.

Halon 1301 has the percentage composition by mass of 8.05% C, 53.69% Br and 38.26% F.

Calculate the empirical formula of Halon 1301.

[Ar of C = 12; Br = 80; F = 19]

(1)

  ☐ A CBrF
  ☐ B CBrF3
  ☐ C CBr3F
  ☐ D CBr2F2

How did you do?

Did this page help you?

11
Sme Calculator1 mark

A company produces tin from an ore called cassiterite, which is mainly tin oxide.

What is the relative formula mass (Mr) of tin oxide, SnO2?

[Ar of  Sn= 119; O= 16 ]

(1)

  ☐ A 135
  ☐ B 151
  ☐ C 270
  ☐ D 1904

How did you do?

Did this page help you?

12
Sme Calculator1 mark

What is the relative formula mass of hydrated magnesium carbonate, MgCO3.2H2O?

[Ar of Mg= 24; H= 1; O=16; C=12]

(1)

  ☐ A 84
  ☐ B 102
  ☐ C 112
  ☐ D 120

How did you do?

Did this page help you?

13a
Sme Calculator2 marks
a)
The mass of a sample of hydrocarbon X is 1.45g. There are 0.025 moles present in the sample.
Show that the relative molecular mass (Mr) of X is 58

(2)

Mr = ..............................................................

How did you do?

13b
Sme Calculator1 mark
b)
Hydrocarbon X is an alkane. Show that the molecular formula of X is C4H10
(1)

How did you do?

13c1 mark
c)
Give the displayed formula of the branched-chain isomer of hydrocarbon X.
(1)

How did you do?

Did this page help you?

141 mark

The diagram shows the displayed formula of succinic acid. 

2-1-displayed-formula-of-succinic-acidWhat is the empirical formula for this compound?

(1)

  ☐ A C4H6O4
  ☐ B CH2O
  ☐ C C2H3O2
  ☐ D CHO

How did you do?

Did this page help you?