Reacting Masses (WJEC GCSE Chemistry: Combined Science)

Revision Note

Richard

Author

Richard

Expertise

Chemistry

How to Calculate a Formula from Reacting Masses

Higher Tier

  • The simplest formula is a whole number ratio of the atoms of each element present in one molecule or formula unit of the compound
    • The simplest formula is often called the empirical formula 
  • The simplest formula of an organic molecule is often different to its chemical / molecular formulae
    • For example, ethanoic acid has the chemical formula CH3COOH or C2H4O2 but its simplest formula is CH2O
  • The chemical formula of an ionic compound is always its simplest formula 
    • For example, sodium chloride has the chemical formula NaCl, which is also its simplest formula

Exam Tip

  • Although, there are questions that ask you to 'calculate the empirical formula of', the exam does not usually use the term 'empirical formula'
  • Typically, the exam will use phrases like:
    • Find the simplest formula of...
    • Calculate the simplest formula of...

Worked example

A sample of a compound was found to contain 10 g of hydrogen and 80 g of oxygen.

Calculate the simplest formula of this compound.

Ar(H) = 1   Ar(O) = 16

Answer:

  hydrogen oxygen
Write the mass of each element  10 g 80 g

Calculate the number of moles

(Divide each mass by the Ar)

open parentheses 10 over 1 close parentheses = 10 open parentheses 80 over 16 close parentheses = 5

Find the simplest whole number molar ratio

(Divide by the smallest number)

open parentheses 10 over 5 close parentheses = 2  open parentheses 5 over 5 close parentheses = 1 

So, the simplest formula = H2O

Worked example

Carbohydrate X was analysed and found to contain 31.58% carbon and 5.26% hydrogen by mass.

Find the simplest formula of carbohydrate X.

Ar(H) = 1   Ar(C) = 162   Ar(O) = 16

Answer:

A carbohydrate contains carbon, hydrogen and oxygen

The percentages do not add up to 100%, which means that you need to calculate the percentage of oxygen needs to be calculated

Percentage of oxygen = 100 - 31.58 - 5.26 = 63.16%

  carbon hydrogen oxygen

Convert % to g

(Assume 100 g of substance is present)

31.58 g 5.26 g 63.16 g

Calculate the number of moles

(Divide each mass by the Ar)

open parentheses fraction numerator 31.58 over denominator 12 end fraction close parentheses = 2.63 open parentheses fraction numerator 5.26 over denominator 1 end fraction close parentheses = 5.26 open parentheses fraction numerator 63.16 over denominator 16 end fraction close parentheses = 3.95

Find the simplest molar ratio

(Divide by the smallest number)

open parentheses fraction numerator 2.63 over denominator 2.63 end fraction close parentheses = 1 open parentheses fraction numerator 5.26 over denominator 2.63 end fraction close parentheses = 2  begin mathsize 14px style open parentheses fraction numerator 3.95 over denominator 2.63 end fraction close parentheses end style = 1.5

Obtain a whole number ratio

(Multiply all by 2)

1 x 2 = 2 2 x 2 = 4 1.5 x 2 = 3

So, the simplest formula = C2H4O3

Exam Tip

  • The molar ratio must be a whole number
    • If you don't get a whole number when calculating the ratio of atoms in an empirical formula, such as 1.5, multiply that and the other ratios to achieve whole numbers
  • Make sure that you show your working
    • Your answer may look like an incorrect formula for a chemical that you know
    • For example, data from the incomplete combustion of magnesium in oxygen could result in a formula of Mg2O for
      magnesium oxide instead of MgO

Molecular Formula

  • Molecular formula gives the actual numbers of atoms of each element present in the formula of the compound

Table of simplest / empirical and molecular formula

Compound  Simplest / empirical formula Molecular formula
Methane CH4 CH4
Ethane CH3 C2H6
Ethene CH2 C2H4
Benzene CH  C6H6

  • To calculate the molecular formula:
    • Step 1: Find the relative formula mass of the simplest / empirical formula
    • Step 2: Use the following equation:

fraction numerator relative space formula space mass space of space molecular space formula over denominator relative space formula space mass space of space simplest space formula end fraction

    • Step 3: Multiply the number of each element present in the empirical formula by the number from step 2 to find the molecular formula

Worked example

Substance X with the simplest formula C4H10S is found to have a relative molecular mass of 180.

Find its molecular formula.

Ar(C) = 12   Ar(H) = 1   Ar(S) = 32

Answer

  • Step 1 - Calculate the relative formula mass of the simplest formula
    • Mr = (12 x 4) + (1 x 10) + (32 x 1) = 90
  • Step 2 - Divide the relative formula mass of X by the relative formula mass of the simplest formula
    • begin mathsize 14px style open parentheses 180 over 90 close parentheses end style = 2
  • Step 3 - Multiply each number of elements by 2
    • C(4 x 2)
    • H(10 x 2)
    • S(1 x 2)     
  • So, the molecular formula of X = C8H20S2

How to Calculate Reacting Masses from an Equation

Higher Tier

  • Chemical / symbol equations can be used to calculate:
    • The moles of reactants and products 
    • The mass of reactants and products
  • To do this:
    • Information from the question is used to find the amount in moles of the substances being considered
    • Then, the ratio between the substances is identified using the balanced chemical equation
    • Once the moles have been determined they can then be converted into grams using the relative atomic or relative formula masses

Worked example

Example 1:

Magnesium undergoes combustion to produce magnesium oxide.

The overall reaction that is taking place is shown in the equation below.

2Mg (s) + O2 (g)  ⟶ 2 MgO (s) 

Calculate the mass of magnesium oxide that can be made by completely burning 6.0 g of magnesium in oxygen in the following reaction:

Ar(O) = 16   Ar(Mg) = 24

Answer:

  • Step 1 - calculate the moles of magnesium 
    • Moles = begin mathsize 14px style open parentheses mass over M subscript r close parentheses end styleopen parentheses 6 over 24 close parentheses = 0.25
  • Step 2 - use the molar ratio from the balanced symbol equation
    • 2 moles of magnesium produce 2 moles of magnesium oxide
    • The ratio is 1 : 1
    • Therefore, 0.25 moles of magnesium oxide is produced
  • Step 3 - calculate the mass of magnesium oxide
    • Mass = moles x Mr = 0.25 moles x (24 + 16) = 10 g

Worked example

Example 2:

In theory, aluminium could decompose as shown in the equation below.

2Al2O3  ⟶  4Al +  3O2 

Calculate the maximum possible mass of aluminium, in tonnes, that can be produced from 51 tonnes of aluminium oxide. 

Ar(O) = 16   Ar(Al) = 27

Answer:

  • Step 1 - calculate the moles of aluminium oxide 
    • Mass = 51 tonnes x 106 = 51 000 000 g
    • Moles = open parentheses mass over M subscript r close parenthesesopen parentheses 51000000 over 102 close parentheses = 500 000
  • Step 2 - use the molar ratio from the balanced symbol equation
    • 2 moles of aluminium oxide produces 4 moles of aluminium 
    • The ratio is 1 : 2
    • Therefore, 2 x 500 000 = 1 000 000 moles of aluminium is produced
  • Step 3 - calculate the mass of aluminium 
    • Mass = moles x Mr = 1 000 000 moles x 27 = 27 000 000 g
    • Mass in tonnes = open parentheses 27000000 over 10 to the power of 6 close parentheses = 27 tonnes

Exam Tip

  • When you see any of the following phrases in a question, make sure you work methodically through the process of calculating moles, using molar ratios and calculating mass
    • Calculate the mass...
    • Calculate the minimum mass...
    • Calculate the maximum mass...
  • As long as you are consistent, it doesn't matter whether you work in grams or tonnes or any other mass unit as the reacting masses will always be in proportion to the balanced equation

Balancing Equations using Reacting Masses

  • If the masses of reactants and products of a reaction are known, they can be used to write a balanced equation for that reaction
  • This is done by converting the masses to moles and simplifying them to find the molar ratios

Worked example

Example 3:

Zinc is extracted from zinc oxide, ZnO.

When carrying out the reaction 1.2 g of carbon reacted with 16.2 g of zinc oxide to produce 4.4 g of carbon dioxide and 13.0 g of zinc.

Determine the balanced equation for the reaction.

Ar(C) = 12   Ar(O) = 16   Ar(Zn) = 65

Answer:

  • Step 1 - calculate the masses
    • C = 12
    • ZnO = 65 + 16 = 81
    • CO2 = 12 + (2 x 16) = 44
    • Zn = 65
  • Step 2 - calculate the moles of each substance using moles = open parentheses mass over M subscript r close parentheses
    • C = open parentheses fraction numerator 1.2 over denominator 12 end fraction close parentheses = 0.1 moles 
    • ZnO = open parentheses fraction numerator 16.2 over denominator 81 end fraction close parentheses = 0.2 moles 
    • CO2 = open parentheses fraction numerator 4.4 over denominator 44 end fraction close parentheses = 0.1 moles 
    • Zn = open parentheses fraction numerator 13.0 over denominator 65 end fraction close parentheses = 0.2 moles
  • Step 3 - convert to the simplest whole number ratio
    • C = 1
    • ZnO = 2
    • CO2 = 1
    • Zn = 2
  • Step 4 - apply the values in front of the chemicals in the equation
    • C + 2ZnO → CO2 + 2Zn

Exam Tip

  • These questions look hard but they are very methodical, so follow the steps and organise your work neatly
  • Remember: The molar ratio of a balanced equation gives you the ratio of the amounts of each substance in the reaction

You've read 0 of your 0 free revision notes

Get unlimited access

to absolutely everything:

  • Downloadable PDFs
  • Unlimited Revision Notes
  • Topic Questions
  • Past Papers
  • Model Answers
  • Videos (Maths and Science)

Join the 100,000+ Students that ❤️ Save My Exams

the (exam) results speak for themselves:

Did this page help you?

Richard

Author: Richard

Richard has taught Chemistry for over 15 years as well as working as a science tutor, examiner, content creator and author. He wasn’t the greatest at exams and only discovered how to revise in his final year at university. That knowledge made him want to help students learn how to revise, challenge them to think about what they actually know and hopefully succeed; so here he is, happily, at SME.