Coastal Fieldwork: Methods (Edexcel GCSE Geography A)

Revision Note

Flashcards

Coastal Fieldwork Methods

Data collection methods

  • The data collection methods will depend on the aims/hypothesis of the fieldwork

  • The starting point with most coastal fieldwork is a question on 'what is needed to answer the enquiry question?'

  • Data collection should include both quantitative and qualitative methods

  • The collection of quantitative data can be completed in several ways in a coastal study:

Quantitative data collection

Beach profile

  • Beach profiles use distance and angle measurements to identify the shape of the beach

  • Follow a transect line from the edge of the sea to the end of the  beach

  • Split the line into segments where the slope angle changes

  • Each reading is taken from one break in a slope to the next break of the slope

    • Student A stands, at a safe distance from the edge of the sea, holding a ranging pole

    • Student B stands holding a second ranging pole, further up the beach where there is a break of slope

    • Measure the distance between the two ranging poles using a tape measure

    • Measure the angle between the matching markers on the ranging pole using a clinometer

    • Repeat the process at each slope break until you reach the top of the beach

Sediment analysis

  • Sediment analysis is used to examine how beach material is sorted across the width of a beach which links to longshore drift processes

  • Depending on the size of the sediment being measured, random, systematic and/or stratified sampling is used to take a sample of beach sediments (such as sand, gravel and pebbles)

  • The sediment is measured at the beach using callipers to measure the axes of each pebble

calliper-measurements-pebbles

Pebble axes points for calliper measurement

  • The a-axis is the shortest axis

  • The b-axis is the widest axis at right angles to the c-axis.

  • The c-axis is the longest axis

Measuring pebble shape

  • The easiest way to measure pebble shape is to classify the stone as either very angular, angular, sub-angular, sub-rounded, rounded or very rounded using a Power’s Scale of Roundness

  • This is judged by eye

  • Using a card with a concentric circle or a protractor, measure the minimum radius of curvature

  • This is the sharpest corner on the c-axis

Measuring longshore drift

  • Choose 25 to 40 pebbles of various shapes and sizes from the beach

  • Using waterproof paint, mark each pebble so you can identify them

  • Spread the pebbles out in the swash zone, and place a marker to show the start point for the pebbles

  • Using a stopwatch, wait for 20 minutes then search for as many pebbles as you can 

  • Measure how far each has travelled from the start point

  • It is possible that some of the pebbles will have disappeared from the beach or gone off in a different direction, but it doesn't mean that your results are ‘wrong’.

  • Record what happened to each pebble (including ‘disappeared’)

  • Repeat the process 3 times, or until you judge that the 'mean' for the distance travelled by a pebble indicates that you have taken an adequate sample

Measuring groynes

  • Use a tape measure and find the height of beach material on either side of a groyne

  • Measure a minimum of three heights along the beach profile of each groyne

  • Compare a series of groynes along the length of the beach

Measuring rip-rap

  • Rip-rap or rock armour data can be used to measure the effectiveness of coastal defence

  • Use a measuring tape to measure the length, height and width of each boulder

  • Measure the angle of the boulder and note if the widest face is facing straight into oncoming waves or at an angle

Qualitative data collection

Photographs and field sketches

  • Photographs and field sketches are qualitative data 

  • Just as with any data collection and presentation, they have strengths and weaknesses

  • In a coastal environment enquiry, photographs and field sketches can be used to show landforms and particular features such as beach load

  • Photographs are also ideal for illustrating the data collection methods used

Worked Example

You have studied a coast as part of your own fieldwork

Explain one limitation of the quantitative fieldwork method you used when investigating beach morphology

(2)

  • Your answer should include information regarding one of the following:

    • Subjectivity about site choice

    • Inaccurate use of equipment

    • Variations in tides or windy/wet weather

Answer:

  • When measuring the gradient of a beach, there is an element of subjectivity in choosing where there’s a change in slope (1). This could have caused the measurement to be greater/larger than the actual (1)

Exam Tip

Annotations and labels are not the same. A label is a simple descriptive point. For example, a spit'. Whereas an annotation is a label with a more detailed description or an explanatory point. For example, 'spit - an extended stretch of beach material projecting out to sea and joined to the mainland at one end.

Coastal enquiry data presentation

  • Data presentation can take many forms

Primary data

  • Much of the primary data collected in a coastal enquiry will be presented in the form of a graphs 

    • Each type of graph is suitable for particular data sets

    • The graphs also may have strengths and limitations

Line graphs 

  • One of the simplest ways to display continuous data

  • Both axes are numerical and continuous 

  • Used to show changes over time or space

Strengths

Limitations

Shows trends and patterns clearly

Does not show causes or effects

Quicker and easier to construct than a bar graph

Can be misleading if the scales on the axis are altered

Easy to interpret

If there are multiple lines on a graph it can be confusing

Requires little written explanation

 

  • A river cross-section is a particular form of line graph because it is not continuous data but the plots can be joined to show the shape of the river channel

River-cross-section-graph

Bar graphs 

  • One of the simplest methods to display discrete data 

  • Bar graphs are useful for:

    • Comparing classes or groups of data

    • Changes over time

Strengths

Limitations

Summarises a large set of data 

Requires additional information

Easy to interpret and construct

Does not show causes, effects or patterns

Shows trends clearly

Can only be used with discrete data

bar-graph

Scatter graph

  • Points should not be connected

  • The best fit line can be added to show the relations

  • Used to show the relationship between two variables

    • In a river study, they are used to show the relationship between different river characteristics such as the relationship between the width and depth of the river channel

Strengths

Limitations

Clearly shows data correlation

Data points cannot be labeled

Shows the spread of data

Too many data points can make it difficult to read

Makes it easy to identify anomalies and outliers

Can only show the relationship between two sets of data

scattergraph

Exam Tip

In the exam, you will not be asked to draw an entire graph. However, it is common to be asked to complete an unfinished graph using the data provided. You may also be asked to identify anomalous results or to draw the best fit line on a scattergraph.

  • Take your time to ensure that you have marked the data on the graph accurately

  • Use the same style as the data which has already been put on the graph

    • Bars on a bar graph should be the same width

    • If the dots on a graph are connected by a line you should do the same

Secondary data

  • Any fieldwork should include secondary data as well as primary data

  • In a river enquiry suitable secondary data may include:

    • Weather data from the Meteorological Office (Met Office)

    • Old photographs of the coastal sample site

    • Newspaper articles/websites about the coastal area

    • Ordnance Survey maps to identify the sample sites

    • Geology maps 

    • Aerial photographs

Worked Example

Explain one way the secondary data you collected supported your investigation

(3)

  • In the answer one mark will be awarded for identifying a secondary data source

  • The second and third marks will be awarded for explaining how it helped you in your coastal investigation

Answer:

  • Below is one possible answer

    • We looked at the data collected by last year’s Year 11 class (1) to compare the beach profile data for the same location that we went to (1) which meant that we could see if beach gradient had actually changed over time (1) 

Analysis

  • Once data has been collected and presented it needs to be analysed

  • The data which is collected from the coast such as beach slope and pebble size is quantitative data and will need to be analysed using statistical methods

  • One of the main statistical methods used in a coastal enquiry will be the mean where mean pebble size or longshore drift needs to be calculated

  • Geographical theories and case studies can also be used in the analysis to explain whether the data collected was as would be expected based on knowledge from those theories/case studies

Exam Tip

Calculation of the mean is a popular exam question. You must remember the following:

  • Show your workings if it is asked for by writing out in full the calculation. This is usually worth 1 mark

  • If asked to give your answer to one decimal place remember to round up or down

    • If the number after the first digit following the decimal point is 5 or higher you need to round up: 10.15 would become 10.2

    • If the number after the first digit following the decimal point is 4 or lower you need to round down: 10.13 would become 10.1

Analysing Photographs and Field Sketches

  • Use of photographs and field sketches is a qualitative analysis

  • Photographs can be used in a coastal enquiry to analyse a number of features:

    • Landforms and their formation

    • Data collection techniques

Conclusion

  • Once the data collected has been analysed, conclusions can be reached

  • This should state whether the hypothesis has been proved or disproved

  • Identify and explain anomalies such as:

    • Recent rockfall making the sample size larger

    • Taking a sample from a protected area or near a groyne

    • Anomalies may just occur or may be the result of incorrect recording or human error reading equipment 

Evaluation

  • The final stage of the coastal enquiry is the evaluation where you note how successful, or not, the river investigation was and what you would do differently next time

    • Next time I would take measurements over a longer period of time to ensure the reliability of data...

    • My equipment failed and I would make sure to bring a spare next time...

    • I think my investigation went well and I would like to repeat this after a storm event to see how much erosion has taken place...

Exam Tip

The 8 mark fieldwork question is often an evaluation of your enquiry or unfamiliar fieldwork. The evaluation could be regarding data collection, analysis or your conclusion. The key factors to remember to include in your answer are:

  • What Went Well: how do you know that your results were accurate and therefore valid?

  • Is the enquiry reliable: Could it be repeated and the same results achieved?

  • What could have been improved?

  • What would you do if you were to repeat the enquiry?

You've read 0 of your 0 free revision notes

Get unlimited access

to absolutely everything:

  • Downloadable PDFs
  • Unlimited Revision Notes
  • Topic Questions
  • Past Papers
  • Model Answers
  • Videos (Maths and Science)

Join the 100,000+ Students that ❤️ Save My Exams

the (exam) results speak for themselves:

Did this page help you?